CZ Scorpion Evo 3 / 3+ stock adapter | type AR-15
Code: E3ARSA
Delivery guarantee
We guarantee that all orders will be delivered
Czech made
We make everything in Czech republic
Stone shop
We exist since 2007 and have a stone shop
Product detailed description
Adapter for installation of AR-15 type stocks for CZ Scorpion EVO 3 models and 3+ models.
Made of aircraft duralumin 7075, hard elox finish.
Made in Czech republic.
Compatibility
This stock is compatible with following CZ models:
- all CZ Scorpion Evo models
- all CZ Scorpion 3+ models
Specification of the stock adapter
This adapter was designed with a focus on stiffness and minimum clearances that would otherwise compromise accuracy.
There is a small cut-out on the bottom, through which you can get to the disassembly button.
This allows the stock to be removed together with the installed stock tube. The stock tube is fixed against rotation with two set screws.
- original Ascalon product
- made in Czech republic
- excellent quality
- factory new
- made of duralumin, hard elox finish
The package contains a 1.5 mm Allen key for tightening the set screws.
Two set screws are installed forward in place and secured with a liquid cotter pin. This requires a slight effort to turn them.
Installation
Simply remove the stock / stock plug that is at the moment installed on your Scorpion by pushing the release button underneath it. If you have folding stock, the button will be onyl visible upon folding the stock. If you have a stock plug, you may need to use hex key to access the button underneath it.