VZ 58 Piston stopper

Product detailed description

Original VZ 58 piston stopper 

The stopper is designed for gunsmiths.

It is inserted into the bolt housing before the barrel is pressed and serves as a piston stop in case the piston moves in the firing direction.

The neck of the piston passes vertically in the smaller half-round part, the other side of the crescent rests on the barrel.

This is an elusive matter.

In domestic conditions, this operation cannot be performed.

The barrel is hot-pressed into the bolt housing with an H6/H6 overlap.

The part cannot simply be made by laser burning, because the edges are fragile and the chrome part of the piston will eventually damage them.